China China B Series Short Pitch Precision Roller Chains

DIN/ISO
Chain No.
Pitch Roller diameter Width between inner plates Pin diameter Pin length Inner plate depth Plate thickness Ultimate 10sile strength Average 10sile strength Weight per meter
P d1
max
b1
min
d2
max
L
max
Lc max h2
max
t/T
max
Q
min
Q0 q
mm mm mm mm mm mm mm mm kN/lbf kN kg/m
04B-1 6.000 4.00 2.80 1.85 6.80 7.8 5.00 0.60 3.0/682 3.2 0.11
05B-1 8.000 5.00 3.00 2.31 8.20 8.9 7.10 0.80 5.0/1136 5.9 0.20
*06B-1 9.525 6.35 5.72 3.28 13.15 14.1 8.20 1.30 9.0/2045 10.4 0.41
08B-1 12.700 8.51 7.75 4.45 16.70 18.2 11.80 1.60 18.0/4091 19.4 0.69
10B-1 15.875 10.16 9.65 5.08 19.50 20.9 14.70 1.70 22.4/5091 27.5 0.93
12B-1 19.050 12.07 11.68 5.72 22.50 24.2 16.00 1.85 29.0/6591 32.2 1.15
16B-1 25.400 15.88 17.02 8.28 36.10 37.4 21.00 4.15/3.1 60.0/13636 72.8 2.71
20B-1 31.750 19.05 19.56 10.19 41.30 45.0 26.40 4.50/3.5 95.0/21591 106.7 3.70
24B-1 38.100 25.40 25.40 14.63 53.40 57.8 33.20 6.00/4.8 160.0/36364 178.0 7.10
28B-1 44.450 27.94 30.99 15.90 65.10 69.5 36.70 7.50/6.0 200.0/45455 222.0 8.50
32B-1 50.800 29.21 30.99 17.81 66.00 71.0 42.00 7.00/6.0 250.0/56818 277.5 10.25
40B-1 63.500 39.37 38.10 22.89 82.20 89.2 52.96 8.50/8.0 355.0/80682 394.0 16.35
48B-1 76.200 48.26 45.72 29.24 99.10 107.0 63.80 12.00/10.0 560.0/127272 621.6 25.00
56B-1 88.900 53.98 53.34 34.32 114.6 123.0 77.80 13.50/12.0 850.0/193180 940.0 35.78
64B-1 101.600 63.50 60.96 39.40 130.0 138.5 90.17 15.00/13.0 112.0/254544 1240.0 46.00
72B-1 114.300 72.39 68.58 44.48 147.4 156.4 103.60 17.00/15.0 1400.0/318180 1550.0 60.80

B Collection Brief Pitch Precision Roller Chains

HZPT brand precision roller chains occur in different types, such as the A sequence and B sequence. They arrive in bolstered and cotter pin kinds and are compliant with ISO, DIN, and ASME / ANSI specifications. These chains offer high precision, wear resistance, and exhaustion resistance. These chains are extensively employed in conveyor equipment and other agricultural machinery. The short pitch and large load potential make them ideal for substantial-energy programs. The B Series Brief Pitch Precision Roller Chains can withstand a increased load and quicker speeds. On ask for, connecting links and distinct chain widths can be specified.

Simplex Roller Chains

*Straight facet plates

Duplex Roller Chains

*Straight side plates

Triplex Roller Chains

*Straight facet plates

Why Decide on B Series Short Pitch Precision Roller Chains from At any time-electrical power?

To make sure the protection and reliability of your transmission products, you ought to be informed of ISO 606:2015, an worldwide standard for limited-pitch precision roller chains. This common specifies the traits of short-pitch precision roller chains, including their proportions, tolerances, sprockets, and tooth gaps. It also supplies info on least 10sile strengths, dimensional definitions, and preload. The ISO normal specifies a key dimension (EO), which is not constantly offered in chain catalogs.

At any time-Electricity has been in the industry for in excess of 15 several years and has recognized a quality model. It emphasizes High quality by strictly controlling creation procedures from the starting. All of our products fulfill sector-common components, method standards, and attachments. We generate high-quality, reliable, and inexpensive industrial roller chains at competitive costs!

Chains and Sprockets

Even though sprockets are typically made to match a particular chain, they have a few variations. In the U.S., chains are produced to a regular, referred to as ANSI. The pitch of a chain is the measurement from 1 particular roller-pin middle to the subsequent. The chain pitch is usually measured in 1/8″ increments.

The 2 components, chains and sprockets operate hand-in-hand. A sprocket is a wheel-shaped projection that hooks on to a chain for a travel. This projection later on became recognized as the sprocket wheel. The modern day chain has been driving equipment for much more than a century. Sprockets are a essential component of a chain-pushed equipment. The sprockets can be employed in numerous industries. Chainsaws also use sprockets to make their blades. Chainsaws, on the other hand, use sprockets for a much more dependable way to reduce supplies. When compared to timing belts, sprocket chains are a lot more durable and dependable.

HZPT is 1 of the top mechanical transmission elements makers and suppliers who can supply a vast range of travel chains and sprockets for sale. Speak to us now if you are fascinated!

Further info

Roller Chain Basics

Before choosing the right roller chain for your machine, it is necessary to learn some basics. Learn about sprockets, 10sile strength, pitch, and width. Read this article to learn more. It will help you make an informed decision. Getting the right product is critical, but it’s not always as simple as choosing a brand name. You need to choose a company that supports its products and provides good service.
chain

Roller sprocket

If you are planning to purchase roller sprockets for your application, you should first look at the various types available. Sprockets available for single-strand roller chains are manufactured by Boston Steel – Type B sprockets are drilled to size. They are available in 1/4, 3/8, 1/2, 5/8, 3/4 and 1″ pitch sizes.
The diameter of the sprocket is important when choosing the right sprocket for your application. Using a caliper to measure the diameter of a toothless plate is a good way to determine the exact size of the sprocket. A caliper is the diameter of a plate without teeth. On Type B and C sprockets, the hub diameter measures the thickness of the hub.
Another type of sprocket is the steel split sprocket, which is split in diameter. This type is easy to install and remove, and is held together by bolts in the hub. Typically, split sprockets have chain pitches ranging from 40 to 240 and bores ranging from 3/4″ to 6″. The split sprockets are designed with 1 pointing towards the ceiling and the other 2 parallel to the floor.
When shopping for sprockets, it is important to remember that they are designed specifically for a specific chain. All chains are manufactured to specific standards. In the United States, the most common standard is ANSI. The chain pitch is the distance between the center of each pin and the center of the next pin. In the US, the standard is always measured in 8-inch intervals.
In addition to sprocket size, sprocket pitch and the surface area also affect chain life. Unlike belt sprockets, which are made of forged steel, the teeth on roller sprockets are stamped from steel sheet or pressed from powdered metal. The harder the teeth, the longer the chain will last.

Roller chain pitch

The pitch of a roller chain is the distance between the sprocket and the pin. The smaller the thread pitch, the smaller the bushing wear. Generally speaking, the smaller the pitch, the longer the life of the chain. For best performance and longest life, manufacturers recommend a minimum chain pitch of 2% to 3%. Chain pitch is important to ensure proper performance, and the manufacturer recommends that you replace the chain when it reaches 2% to 3% of normal.
To determine the correct chain pitch for a particular chain, first determine the sprocket size and pitch. Pitch is the distance between pin centers, measured in 1/8 inch increments. The pin diameter of the chain is also important. If you’re not sure about the pin diameter of your chain, measure a few links to get a good average reading. Alternatively, use a caliper to measure the inside diameter of the sprocket and count the number of teeth.
When sizing a sprocket, measure the chain between the gears with a caliper and compare it to the measurements on the chain size chart. Make sure you have checked all the specs and checked the correct chain pitch. Then, choose the correct chain pitch for your needs. This is a critical step in choosing the right chain. So get the correct pitch for your roller chain. Correct pitch helps ensure maximum performance and safety.
To identify a specific type of roller chain, measure its 10sile strength. This represents the amount of load the chain can withstand before breaking. Another key parameter to consider is fatigue strength. Chains with high fatigue strength are more resistant to rust and wear than chains with low fatigue strength. The numbers on the right in the standard numbering represent normal or light duty chains, while the numbers on the left represent the pitch of heavy-duty chains.
Double pitch roller chains are a variant of single pitch chains. They are manufactured according to ISO 606 and meet the same standards as single pitch chains. They are mainly used in applications with lower requirements for speed and power transmission. The plates of double pitch roller chains are also longer than single pitch chains. The double pitch drive series is also used for elevator and long conveyor drives. There are 3 main types of roller chains: single-pitch chains, double-pitch carriers, and oversized rollers.

Roller chain width

When buying a roller chain, 1 of the first decisions you must make is its width. To make this determination, you need to measure the overall width of the chain, the diameter, and the width of each roller. You must also know the height and thickness of the board. After taking these measurements, you can start shopping for the perfect roller chain. But before you buy a new chain, it’s important to know what to expect from the chain itself.
There are many different types of roller chains. These chains are available for ANSI and metric measurements. They come in single-stranded and double-stranded variants. They are usually used for power transmission. Other types include agricultural, automotive, conveyor, multi-strand, and 4-strand chains. These charts also include a chart so you can easily see the exact size you need. Listed below are some of the benefits of buying a roller chain.
Roller diameter and pin diameter are important factors in choosing the correct chain width. The width of the chain is the nearest binary fraction of 5/8 of an inch. It should be at least half the thickness of the sprocket, and the plate thickness is 1-8h the width of the chain. Overweight chains are indicated with the suffix H. The pitch and width of the chain are determined by the working load and machine speed.
The outer links of the roller chain are called pin links. These pins are inserted into the bushings of the adjacent roller links. They are held in place by cotter pins. Pin links are usually pressed into the pins of heavy-duty chains. These pins are used to hold the rollers in place. However, these pin chains can reduce the power rating of roller chains by up to 20%.
The ANSI 29.1 Steel Chain Specification specifies a minimum pitch in inches and ultimate strength of 12,500 x pitch in inches. At the same time, the O-ring chain greatly reduces wear due to its lubricating effect. O-ring and X-ring chains contain a lubricant injected by vacuum when riveting the chain together. Transmission chains are tested and governed by standards bodies such as ANSI. In 2011, the American Society of Mechanical Engineers developed a standard for precision power transmission chains.
chain

Roller chain 10sile strength

One of the most important indicators of roller chain strength is 10sile strength. This measurement refers to the amount of load the chain can withstand before breaking. Another measure, called fatigue strength, refers to the maximum load a chain can withstand before it breaks. The strength of a roller chain depends on its size, the quality of the steel used in its construction, and the heat treatment. There are also differences in the types of shot peening used to treat steel, pitch holes, and link plates.
When choosing a roller chain, the workload is critical. This is the maximum load the chain can withstand before fatigue failure occurs. This measurement is critical because it helps determine the type of load applied to the chain. When deciding which roller chain to buy, be sure to consider the mechanical type and desired strength. Then, make sure it meets strength and load-carrying capacity requirements.
The ultimate 10sile strength of a roller chain is based on the manufacturer’s recommended maximum 10sile strength. However, the actual 10sile strength may be higher or lower than this value. The working load limit of a roller chain can also be calculated by multiplying the chain diameter by the grade. The working load limit of a chain is the highest 10sion it can withstand before breaking. This value is usually expressed in points.
The maximum 10sile strength of roller chains varies by chain type. The single-strand heavy chain has thick side plates for higher shock loads. Single strand heavy-duty roller chains, also known as “bushing” roller chains, are also available. Double-stranded heavy chains are structurally similar, but they have 2 layers of steel connected by pins that are nearly twice as strong as standard roller chains.
The 10sile strength of a single-strand roller chain is approximately 500 tons. In comparison, a single-chain blockchain has a 10sile strength of 900. The 10sile strength of the 2 is similar, and it is not recommended to choose 1 or the other. Although steel and titanium chains are considered the strongest materials for roller chains, these materials are not magnetic.